This chassis started life as
a Seeburg jukebox amplifier. It's a really cool brown
hammer tone finish. I capped off the top with some 6061
aluminum so that I could start from scratch and drill holes
where I wanted them. The original tube holes were all over
the place and was not a very useable layout.
Here you can see the inside
and where all the original holes were.
Here's all the holes for the
18 watt Lite I am going to build in this chassis.
The Tube amp Library of information
Click the link above for
Tube amp info, Schematics, Board building information, Projects, Mods, Transformer
diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Here is where you can go to ask tube amplifier
questions.
You will find a large community of amp builders at the link below. Please visit my Tube Amplifier Forum
