5E3 Tweed deluxe parts listing
This is not a kit, it is a parts listing
|
| Back to diagrams section |
| Qty |
Description
of part - All of the parts listed below can be found in the Parts
section. |
| 1 |
5E3
repro chassis - the tube sockets below fit this chassis |
| 2 |
9 pin
fender style tube sockets |
| 3 |
8 pin
ceramic tube sockets |
| 2 |
#11
Switchcraft speaker jacks |
| 1 |
Power
cord (8 or 12 foot) |
| 1 |
Power
cord clamp |
| 1 |
Power
cord strain relief |
| 1 |
Fender
lamp assembly |
| 1 |
Bulb |
| 1 |
Jewel
(your choice of color) |
| 1 |
Spst
carling power switch |
| 1 |
Spdt
carling ground switch (Mod: make this a standby instead with another spst) |
| 1 |
Fender
style fuse holder |
| 1 |
2 amp
slo-blo fuse |
| 1 |
TDPT
Power transformer |
| 1 |
041318
output transformer |
| 3 |
Black
chicken head knobs |
| 1 |
5E3 Board kit - see the board kit manufacturers page
The Hoffman board kit has all the parts mounted including the filter caps.
The circuit board Standoffs, pots and input jacks are also included in the kit. |
| 1 |
5Y3
Sovtek tube rectifier |
| 2 |
6V6EH
power tubes |
| 1 |
12AX7WA
pre amp tube |
| 1 |
12AY7
pre amp tube (Mod: A 12AX7 can be used instead for more gain.) |
Mod: Add a
125C3A or 125C1A choke instead of the 5K/5
watt resistor in the power supply.
A choke really improves the tone and feel of the amp. See the transformer
parts page for chokes. |
Prices are not listed here because it would be too difficult for me to keep up
with updating the parts prices with parts located several places in the web site.
You can see all the parts prices in the Parts catalog pages on the web site.
A pricing estimate of all the parts listed above is around $440 as of 03/31/00.
This would be a complete chassis, ready to mount in a cabinet.
There are cabinet guys listed on my links page.
You would also need a 12 inch speaker to complete the amp. See the speaker
page on the web site. |
| Hoffman
5E3 Board parts listing |
| See layout diagram for
blue text parts below. |
| QTY |
DESCRIPTION |
| On board 1/2 watt
resistors |
| 4 |
1.5K |
| 3 |
100K |
| 2 |
56K |
| 1 |
1MEG |
| 2 |
220K |
| Off board 1/2 watt
resistors |
| 2 |
1.5K |
| 4 |
68K |
| 2 |
1M |
| On board 3 watt
resistors |
| 2 |
470 OHM |
| 1 |
22K |
| On board
5 watt
resistors |
| 1 |
250 OHM |
| 1 |
5K |
| On board capacitors |
| 1 |
.022/630V |
| 4 |
.1/630V |
| 4 |
22/50V |
| 3 |
16/475V |
| Off board
capacitors |
| 1 |
500P |
| 1 |
.0047/630V |
| On board misc |
| 4 |
1/4 STANDOFFS |
| 4 |
5/8" SCREWS |
| 4 |
NUTS |
| 1 |
1/8" THICK
CIRCUIT BOARD 8 1/4 inches
long |
| 42 |
TURRET LUGS |
| Off board misc |
| 3 |
1MA POTS |
| 4 |
12A JACKS |
| 5 ft |
EACH RED, GREEN, BLACK, WHITE
20GA SOLID CORE WIRE |
| 5 ft |
EACH RED, GREEN, BLACK 18 GA
STRANDED WIRE |
| 2 ft |
MINI SHIELDED CABLE |
| 4 |
ROUND RING TERMINALS |
| 2 inches |
HEAT SHRINK TUBING |
| 1 |
LAYOUT DIAGRAM |
| 1 |
SET OF INSTRUCTIONS |
