image
Handles-Amp Trim Parts Foot Pedals Jacks-Plugs-Connectors Jacks-Plugs-Connectors
Tools and Batteries Fuse Holders-Cords-AC Items Capacitors Transformers
Jacks-Plugs-Connectors Wire-Cable-Heat shrink Pots-Knobs Foot Pedals
Lamps-Diodes-Channel Switching Fuse Holders-Cords-AC Items Tube Sockets Handles-Amp Trim Parts
Screws-Nuts-Washers Jacks-Plugs-Connectors Fuse Holders-Cords-AC Items Screws-Nuts-Washers
Fuse Holders-Cords-AC Items Tube Sockets Handles-Amp Trim Parts Misc Hardware-Grommets-Feet-Ring terminals
Pots-Knobs Pots-Knobs Pots-Knobs Pots-Knobs
Tools and Batteries Misc Hardware-Grommets-Feet-Ring terminals Transformers Switches
Handles-Amp Trim Parts Switches Jacks-Plugs-Connectors Pots-Knobs
Screws-Nuts-Washers Misc Hardware-Grommets-Feet-Ring terminals Lamps-Diodes-Channel Switching Capacitors
Tube Sockets Pots-Knobs Pots-Knobs Switches
Tubes-Valves Circuit Board Building parts Jacks-Plugs-Connectors Handles-Amp Trim Parts
Capacitors Circuit Board Building parts Jacks-Plugs-Connectors Tubes-Valves
Switches Capacitors Chassis-Boxes Tubes-Valves
Tube Sockets Switches Tube Sockets Resistors
Lamps-Diodes-Channel Switching Guitar Strings Resistors Books
Circuit Board Building parts Circuit Board Building parts Screws-Nuts-Washers Lamps-Diodes-Channel Switching
Transformers Circuit Board Building parts Wire-Cable-Heat shrink Jacks-Plugs-Connectors
Tools and Batteries Fuse Holders-Cords-AC Items Pots-Knobs Pots-Knobs
Wire-Cable-Heat shrink Misc Hardware-Grommets-Feet-Ring terminals Lamps-Diodes-Channel Switching Tubes-Valves
Lamps-Diodes-Channel Switching Wire-Cable-Heat shrink Pots-Knobs Pots-Knobs
Foot Pedals Wire-Cable-Heat shrink Lamps-Diodes-Channel Switching Fuse Holders-Cords-AC Items
Tubes-Valves Bike Light Parts Chassis-Boxes Jacks-Plugs-Connectors
Bike Light Parts Reverb tanks and Bags Tools and Batteries Jacks-Plugs-Connectors
Tube Sockets Tubes-Valves Transformers Resistors
Capacitors Screws-Nuts-Washers Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching
Tube Sockets Transformers Resistors Tube Sockets
Tools and Batteries Transformers Switches Tube Sockets
Jacks-Plugs-Connectors
You can scroll through the images above using the Image scroll controls or you can use the Left and Right arrow keys on your keyboard.

Hello, you are a guest in the Hoffman Amplifiers forum May 21, 2013, 12:10:18 pm
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Media Login Register  
Hoffman Amplifiers > Amp Stuff > AmpTools/Tech Tips (Moderators: Geezer, tubenit, PRR, sluckey) > Dumb Terminology Question
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Dumb Terminology Question  (Read 280 times)
0 Members and 1 Guest are viewing this topic.
Fresh_Start
Level 4
****
Offline Offline

Posts: 2507


noob de Lux
« on: September 08, 2009, 01:58:33 pm »
I want to connect the "sync" output of my signal generator to the "Trigger" input of my oscilloscope.  The signal generator has two jacks for bannana plugs.  What do you call the connector type on the oscilloscope?  The jack is just like the jacks for the probes.  You push on and twist.

I need to know so that I can order (or make) a cable.  Any good ideas on sources for a ready-to-use cable?

Thanks in advance for your help.

Chip
Logged
Quote from: jjasilli
We have proven once again no plan survives contact with the enemy, or in this case, with the amp.

Quote from: PRR
Plan to be wrong about something.
jhadhar65
Level 4
****
Offline Offline

Posts: 2500


The whole thing stinks like yesterdays diapers!
« Reply #1 on: September 08, 2009, 02:45:54 pm »
It's a BNC connector.

Can't help on the ready-made cable source, though.
Logged
sluckey
Global Moderator
Level 5
******
Offline Offline

Posts: 8008
« Reply #2 on: September 08, 2009, 02:55:39 pm »
Don't make a special cable. Just get several of these Pomona 1269 adapters and use all BNC cables.

* 1269.jpg (40.03 KB, 640x640 - viewed 27 times.)
Logged
Fresh_Start
Level 4
****
Offline Offline

Posts: 2507


noob de Lux
« Reply #3 on: September 08, 2009, 05:07:52 pm »
You are most excellent dudes!

Steve, with a manufacturer and a part number, even I can find the darned thing.  wink

Cheers,

Chip
Logged
Quote from: jjasilli
We have proven once again no plan survives contact with the enemy, or in this case, with the amp.

Quote from: PRR
Plan to be wrong about something.
sluckey
Global Moderator
Level 5
******
Offline Offline

Posts: 8008
« Reply #4 on: September 08, 2009, 08:44:47 pm »
Here's another adapter you will find useful for guitar amp work.

http://www.pomonaelectronics.com/pdf/d1297_1_01.pdf

* 1297.jpg (24.45 KB, 927x441 - viewed 27 times.)
Logged
Pages: [1]   Go Up
  Print  
« previous next »
Hoffman Amplifiers > Amp Stuff > AmpTools/Tech Tips (Moderators: Geezer, tubenit, PRR, sluckey) > Dumb Terminology Question

 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
This is the Hoffman amplifiers tube amp parts catalog, please choose a link below.
Amp trim/Handles Bike Lighting parts Board Building Parts Guitar Strings/Books
Capacitors Chassis/Boxes Foot Pedals Fuses/Cords/AC
Jacks/Plugs/connectors Pots/Knobs Lamps/Diodes/Channel Switching Misc. Hardware
Resistors Reverb Items Screws/Nuts/Washers Switches
Tools-Batteries Transformers Tubes/Valves Tube Sockets
Wire/Cable Public Parts list Page Search the Hoffman Amps parts catalog Non Stocked Parts
The Tube amp Library of information
 Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photos, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Check out our huge library of schematics here