image
Handles-Amp Trim Parts Foot Pedals Jacks-Plugs-Connectors Jacks-Plugs-Connectors
Tools and Batteries Fuse Holders-Cords-AC Items Capacitors Transformers
Jacks-Plugs-Connectors Wire-Cable-Heat shrink Pots-Knobs Foot Pedals
Lamps-Diodes-Channel Switching Fuse Holders-Cords-AC Items Tube Sockets Handles-Amp Trim Parts
Screws-Nuts-Washers Jacks-Plugs-Connectors Fuse Holders-Cords-AC Items Screws-Nuts-Washers
Fuse Holders-Cords-AC Items Tube Sockets Handles-Amp Trim Parts Misc Hardware-Grommets-Feet-Ring terminals
Pots-Knobs Pots-Knobs Pots-Knobs Pots-Knobs
Tools and Batteries Misc Hardware-Grommets-Feet-Ring terminals Transformers Switches
Handles-Amp Trim Parts Switches Jacks-Plugs-Connectors Pots-Knobs
Screws-Nuts-Washers Misc Hardware-Grommets-Feet-Ring terminals Lamps-Diodes-Channel Switching Capacitors
Tube Sockets Pots-Knobs Pots-Knobs Switches
Tubes-Valves Circuit Board Building parts Jacks-Plugs-Connectors Handles-Amp Trim Parts
Capacitors Circuit Board Building parts Jacks-Plugs-Connectors Tubes-Valves
Switches Capacitors Chassis-Boxes Tubes-Valves
Tube Sockets Switches Tube Sockets Resistors
Lamps-Diodes-Channel Switching Guitar Strings Resistors Books
Circuit Board Building parts Circuit Board Building parts Screws-Nuts-Washers Lamps-Diodes-Channel Switching
Transformers Circuit Board Building parts Wire-Cable-Heat shrink Jacks-Plugs-Connectors
Tools and Batteries Fuse Holders-Cords-AC Items Pots-Knobs Pots-Knobs
Wire-Cable-Heat shrink Misc Hardware-Grommets-Feet-Ring terminals Lamps-Diodes-Channel Switching Tubes-Valves
Lamps-Diodes-Channel Switching Wire-Cable-Heat shrink Pots-Knobs Pots-Knobs
Foot Pedals Wire-Cable-Heat shrink Lamps-Diodes-Channel Switching Fuse Holders-Cords-AC Items
Tubes-Valves Bike Light Parts Chassis-Boxes Jacks-Plugs-Connectors
Bike Light Parts Reverb tanks and Bags Tools and Batteries Jacks-Plugs-Connectors
Tube Sockets Tubes-Valves Transformers Resistors
Capacitors Screws-Nuts-Washers Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching
Tube Sockets Transformers Resistors Tube Sockets
Tools and Batteries Transformers Switches Tube Sockets
Jacks-Plugs-Connectors
You can scroll through the images above using the Image scroll controls or you can use the Left and Right arrow keys on your keyboard.

Hello, you are a guest in the Hoffman Amplifiers forum May 22, 2013, 12:14:44 am
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Media Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: epiphone sheraton - how to clean the pots???  (Read 273 times)
0 Members and 1 Guest are viewing this topic.
LooseChange
SMG
Level 4
***
Offline Offline

Posts: 3470


Keep it greasy so it goes down easy.


WWW
« on: June 29, 2008, 05:49:41 am »

I'm trying to help out a friend with his hollow body guitar.  The pots are noisy.  Anyone have a trick to clean the pots without removing them??

Here's a generic picture.


* EShera.jpg (7 KB, 290x290 - viewed 40 times.)
Logged

Call me Dan
www.fydamps.com
bigsbybender
Level 3
***
Offline Offline

Posts: 1923


Hack Of All Trades


WWW
« Reply #1 on: June 29, 2008, 12:17:16 pm »

You may be able to clean the pots nearest to the F-Holes using the straw attachment that Pot/tuner cleaners come with. I've done this before, but I wasn't able to get to the tone knobs without removing them.  The problem with this method is that you are working blindly so you can't see how much dirt comes out of the pot...and if the excess cleaner is mucking up the inside of the guitar.

it may not hurt to carefully place a rag in the guitar under where you are working to prevent excess cleaners from dripping into the hollow cavity.

j.
« Last Edit: June 29, 2008, 12:18:07 pm by bigsbybender » Logged

Open Minded But Fixed Bias
LooseChange
SMG
Level 4
***
Offline Offline

Posts: 3470


Keep it greasy so it goes down easy.


WWW
« Reply #2 on: June 29, 2008, 02:59:07 pm »

Thanks for the tips.  All the pots were noisy as was the jack. I managed to remove everything.  I used dental floss tied to the pots and pulled them back through the guitar body. Used a piece of wire as a snake.  It worked without a hitch.

One tip I learned... Thread the washer and nut onto the floss before you pull it through.  Otherwise when you try to put the nut on the pot falls back in!!
Logged

Call me Dan
www.fydamps.com
bigsbybender
Level 3
***
Offline Offline

Posts: 1923


Hack Of All Trades


WWW
« Reply #3 on: July 02, 2008, 09:06:10 pm »

Quote
Used a piece of wire as a snake.

Would that be called a baby snake?  :P
Does it live in a ho ho ho a hole.....that is usually empty. Tiny tube....

 ;)

j.
Logged

Open Minded But Fixed Bias
Pages: [1]   Go Up
  Print  

 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
This is the Hoffman amplifiers tube amp parts catalog, please choose a link below.
Amp trim/Handles Bike Lighting parts Board Building Parts Guitar Strings/Books
Capacitors Chassis/Boxes Foot Pedals Fuses/Cords/AC
Jacks/Plugs/connectors Pots/Knobs Lamps/Diodes/Channel Switching Misc. Hardware
Resistors Reverb Items Screws/Nuts/Washers Switches
Tools-Batteries Transformers Tubes/Valves Tube Sockets
Wire/Cable Public Parts list Page Search the Hoffman Amps parts catalog Non Stocked Parts
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photos, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Check out our huge library of schematics here