Help needed with Revibe

[Twanger]

Hi all,

After a few days spent on building my revibe i finally got it done and turned it on for the first time today,
i can hear a bit of tremolo thumpin, i can hear the reverb if i gently hit the pan... but i cant get any guitar sound out of it ( the guitar cables are fine) if i touch the tip of of the input jack i get a buzz, but if i plug my guitar and strum a chord.... no sound... im pretty sure that there is a little something that i forgot, any toughts ??

Thanks
John

[bluejay]

I just finished helping a guy fix his reverb.  I switched the Rca's around.  He had gotten them mixed up.  

[Twanger]

After cranking the amp i just noticed that im getting a really faint guitar sound, but the reverb and vibrato have noeffect all all on the sound.

John

[ack]

Not that I'm an expert. This is like the stand alone doug has posted? If you can hear a ping when you tap the tank, at least you know V1a is working. Are you using a 6V6? Do you have B+ going to it? May be power supply?

I've built 3 so far, the only trouble I had was I wired the dwell pot wiper to ground. :P Just once though.