image
Reverb tanks and Bags Foot Pedals Wire-Cable-Heat shrink Capacitors
Jacks-Plugs-Connectors Wire-Cable-Heat shrink Transformers Tubes-Valves
Lamps-Diodes-Channel Switching Tubes-Valves Screws-Nuts-Washers Pots-Knobs
Fuse Holders-Cords-AC Items Pots-Knobs Jacks-Plugs-Connectors Handles-Amp Trim Parts
Handles-Amp Trim Parts Capacitors Lamps-Diodes-Channel Switching Transformers
Tube Sockets Resistors Pots-Knobs Jacks-Plugs-Connectors
Foot Pedals Lamps-Diodes-Channel Switching Switches Tube Sockets
Tools and Batteries Wire-Cable-Heat shrink Transformers Transformers
Jacks-Plugs-Connectors Chassis-Boxes Chassis-Boxes Screws-Nuts-Washers
Capacitors Circuit Board Building parts Jacks-Plugs-Connectors Pots-Knobs
Tools and Batteries Jacks-Plugs-Connectors Pots-Knobs Circuit Board Building parts
Wire-Cable-Heat shrink Jacks-Plugs-Connectors Capacitors Pots-Knobs
Wire-Cable-Heat shrink Misc Hardware-Grommets-Feet-Ring terminals Resistors Jacks-Plugs-Connectors
Switches Switches Fuse Holders-Cords-AC Items Handles-Amp Trim Parts
Lamps-Diodes-Channel Switching Circuit Board Building parts Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching
Bike Light Parts Screws-Nuts-Washers Screws-Nuts-Washers Misc Hardware-Grommets-Feet-Ring terminals
Tube Sockets Tube Sockets Jacks-Plugs-Connectors Tubes-Valves
Lamps-Diodes-Channel Switching Circuit Board Building parts Handles-Amp Trim Parts Jacks-Plugs-Connectors
Capacitors Pots-Knobs Tools and Batteries Tubes-Valves
Tube Sockets Tube Sockets Tools and Batteries Misc Hardware-Grommets-Feet-Ring terminals
Tubes-Valves Pots-Knobs Fuse Holders-Cords-AC Items Tubes-Valves
Fuse Holders-Cords-AC Items Books Pots-Knobs Lamps-Diodes-Channel Switching
Guitar Strings Tube Sockets Resistors Jacks-Plugs-Connectors
Pots-Knobs Fuse Holders-Cords-AC Items Fuse Holders-Cords-AC Items Tools and Batteries
Screws-Nuts-Washers Tube Sockets Misc Hardware-Grommets-Feet-Ring terminals Switches
Transformers Foot Pedals Switches Pots-Knobs
Tube Sockets Switches Resistors Handles-Amp Trim Parts
Transformers Pots-Knobs Bike Light Parts Circuit Board Building parts
Lamps-Diodes-Channel Switching
You can scroll through the images above using the Image scroll controls or you can use the Left and Right arrow keys on your keyboard.

Hello, you are a guest in the Hoffman Amplifiers forum June 19, 2013, 12:13:36 am
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Media Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: "dual rectifier"  (Read 849 times)
0 Members and 1 Guest are viewing this topic.
stingray_65
SMG
Level 3
***
Offline Offline

Posts: 932



« on: February 06, 2012, 12:34:36 pm »

I've been putzin around the WWW again.

I'm seeing a few references to "dual rectifier mods" and I see Mesa Boogie has a dual rectifier amp.

What's that about?

How does 2 recto's influence the tone or voicing of an amp?

Is it just to compensate for high losses when using a 5U4?

Ray
Logged

My mind is aglow with whirling, transient nodes of thought careening through a cosmic vapor of invention (H. Lamarr)
John
So what's that do?
Level 3
***
Offline Offline

Posts: 863



« Reply #1 on: February 06, 2012, 12:48:14 pm »

"Dual Rectifier" sounds cool, and you know us geetar players ain't too smart.  laugh
Logged

Tapping into the inner tube.
kagliostro
Level 4
****
Offline Offline

Posts: 2409



« Reply #2 on: February 06, 2012, 01:23:12 pm »

There are two different implementation of the rectifier circuit in the Dual Rectifier

As far as I can know, don't use the first schematic, it is prone to tube failure

About tone change

changing from Tube rectifier to SS rectifier is something like the opposite side on using a VVR

VVR gives early distortion when you turn to low voltage the opposite the SS rectifier respect Tube, also if you don't use a SAG resistor you can imagine the effect

Kagliostro



* mesaboogiedualrectifier5.gif (15.55 KB, 959x719 - viewed 83 times.)

* boogie_dualrectifier_3ch_solo_head_Pagina_05.gif (72.44 KB, 695x537 - viewed 269 times.)
« Last Edit: February 08, 2012, 08:38:17 am by kagliostro » Logged
stingray_65
SMG
Level 3
***
Offline Offline

Posts: 932



« Reply #3 on: February 06, 2012, 01:30:01 pm »

OH!

LOL I see now, either solid state or hollow state!

nothing to with 2 recto tubes!

got it!
Logged

My mind is aglow with whirling, transient nodes of thought careening through a cosmic vapor of invention (H. Lamarr)
kagliostro
Level 4
****
Offline Offline

Posts: 2409



« Reply #4 on: February 06, 2012, 01:42:28 pm »

There is one Mesa schematic that is prone to give confusion

The Blue Angel, SS and Tube at the same time, but different circuits are connected to it


Kagliostro



* Pagine da boogie_blueangel.jpg (139.99 KB, 1000x717 - viewed 56 times.)
« Last Edit: February 06, 2012, 01:57:34 pm by kagliostro » Logged
sluckey
Global Moderator
Level 5
******
Offline Offline

Posts: 8093



« Reply #5 on: February 06, 2012, 01:52:54 pm »

"The term Dual Rectifier originally referred to the two options available to rectify the high voltage current being supplied to the amplifier. However, lesser-informed players assumed it referred to the dual 5U4 tubes in the amplifier"

Yes, it refers to tube and ss rectifiers. However, many of Mesa's dual rectifier amps used 4 big output tubes and one 5U4 can't deliver enough juice for 4 big output tubes. So, you have to run parallel rectifier tubes, or flip a switch and run ss diodes.

I had an old Wurlitzer jukebox amp that ran four 6L6s and it had parallel 5U4s too. I converted it to a Twin Reverb/Bassman amp. You might say it was the original "dual rectifier" guitar amp!    icon_biggrin

http://home.comcast.net/~seluckey/amps/misc/76_Amp_Project.pdf



« Last Edit: February 06, 2012, 01:57:01 pm by sluckey » Logged
jjackson7
Level 1
*
Offline Offline

Posts: 40


« Reply #6 on: February 06, 2012, 04:05:08 pm »

"The term Dual Rectifier originally referred to the two options available to rectify the high voltage current being supplied to the amplifier. However, lesser-informed players assumed it referred to the dual 5U4 tubes in the amplifier"

Triple Rec?
Logged
Dave
Level 2
**
Offline Offline

Posts: 285


« Reply #7 on: February 06, 2012, 07:53:27 pm »


Triple Rec?

Who's up for a little hair splitting?

Dave
Logged
PRR
Global Moderator
Level 5
******
Offline Offline

Posts: 8593


Maine USA


WWW
« Reply #8 on: February 06, 2012, 11:52:33 pm »

Dual rectifier is obviously twice as good.

I had a projector arc-lamp power supply with SIX rectifiers. Imagine how good that would sound !! !! !! If it only had audio input/output.....
Logged
chuggy
Level 2
**
Offline Offline

Posts: 131


tubes are hot


« Reply #9 on: February 07, 2012, 05:38:57 pm »

Fender narrow panel tweed Twin (5E8A?) had dual 5U4 rectos.
Logged
Willabe
Level 4
****
Offline Offline

Posts: 2933


« Reply #10 on: February 07, 2012, 06:29:07 pm »

The Blue Angel, SS and Tube at the same time, but different circuits are connected to it.

SS to pre amp tubes, Tube rec. to power amp. I think it would be worth checking out. Might sound good to some players?


                            Brad     think
Logged
sluckey
Global Moderator
Level 5
******
Offline Offline

Posts: 8093



« Reply #11 on: February 07, 2012, 06:38:26 pm »

Marketing gimmick???
Logged
Willabe
Level 4
****
Offline Offline

Posts: 2933


« Reply #12 on: February 07, 2012, 06:49:35 pm »

Marketing gimmick???

Sure but you might be able to keep the plate voltage higher on the pre amp tubes and let the power tubes still sag and/or at a lower plate voltage on the power tubes than it would take to have the same (higher) plate voltage on the pre tubes down the PSU line?

 
                        Brad      dontknow
Logged
John
So what's that do?
Level 3
***
Offline Offline

Posts: 863



« Reply #13 on: February 07, 2012, 08:53:03 pm »

Marketing gimmick???


Never!!!
Logged

Tapping into the inner tube.
RicharD
SMG
Level 4
***
Offline Offline

Posts: 2060



WWW
« Reply #14 on: February 07, 2012, 09:54:10 pm »

I have a friend with a Fender something that is switchable between tube and ss rectification.  He says it eats tubes when using the ss recto.  I haven't been inside of it but I'm assuming there's roughly 50 more volts when rectifying using SS.  My guess is the amp is biased bleeding edge when running SS and prolly a little cold with the 5U4GB.  I'm sorry but I'm really believing more and more in fewer knobs and switches = better amp.
Logged
kagliostro
Level 4
****
Offline Offline

Posts: 2409



« Reply #15 on: February 08, 2012, 03:48:15 am »

Quote
He says it eats tubes when using the ss recto.


I would like to see the adopted schematic

this schematic is prone to eat tubes



this should not do it



Kagliostro
« Last Edit: February 08, 2012, 08:39:03 am by kagliostro » Logged
Jack1962
Level 2
**
Offline Offline

Posts: 262


I love AMPS, Tube or SS


WWW
« Reply #16 on: February 08, 2012, 09:30:56 am »

I have worked on a few Mesa Dual Recto's , myself I prefer them over a Marshall any day , and sorry guys but they just blow a Fender out of the water lol . The Solid State/ Tube recto switch just check it out you"ll see what it does , tone is tighter with the solid state recto , more sag with the tube.

NO GIMMICK , THE REAL DEAL  laugh
Logged

Any tube unit can be brought back to life.
I never meet a tube I didn't like.
Pages: [1]   Go Up
  Print  

 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
This is the Hoffman amplifiers tube amp parts catalog, please choose a link below.
Amp trim/Handles Bike Lighting parts Board Building Parts Guitar Strings/Books
Capacitors Chassis/Boxes Foot Pedals Fuses/Cords/AC
Jacks/Plugs/connectors Pots/Knobs Lamps/Diodes/Channel Switching Misc. Hardware
Resistors Reverb Items Screws/Nuts/Washers Switches
Tools-Batteries Transformers Tubes/Valves Tube Sockets
Wire/Cable Public Parts list Page Search the Hoffman Amps parts catalog Non Stocked Parts
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photos, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Check out our huge library of schematics here

click here for more info