image
Reverb tanks and Bags Foot Pedals Wire-Cable-Heat shrink Capacitors
Jacks-Plugs-Connectors Wire-Cable-Heat shrink Transformers Tubes-Valves
Lamps-Diodes-Channel Switching Tubes-Valves Screws-Nuts-Washers Pots-Knobs
Fuse Holders-Cords-AC Items Pots-Knobs Jacks-Plugs-Connectors Handles-Amp Trim Parts
Handles-Amp Trim Parts Capacitors Lamps-Diodes-Channel Switching Transformers
Tube Sockets Resistors Pots-Knobs Jacks-Plugs-Connectors
Foot Pedals Lamps-Diodes-Channel Switching Switches Tube Sockets
Tools and Batteries Wire-Cable-Heat shrink Transformers Transformers
Jacks-Plugs-Connectors Chassis-Boxes Chassis-Boxes Screws-Nuts-Washers
Capacitors Circuit Board Building parts Jacks-Plugs-Connectors Pots-Knobs
Tools and Batteries Jacks-Plugs-Connectors Pots-Knobs Circuit Board Building parts
Wire-Cable-Heat shrink Jacks-Plugs-Connectors Capacitors Pots-Knobs
Wire-Cable-Heat shrink Misc Hardware-Grommets-Feet-Ring terminals Resistors Jacks-Plugs-Connectors
Switches Switches Fuse Holders-Cords-AC Items Handles-Amp Trim Parts
Lamps-Diodes-Channel Switching Circuit Board Building parts Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching
Bike Light Parts Screws-Nuts-Washers Screws-Nuts-Washers Misc Hardware-Grommets-Feet-Ring terminals
Tube Sockets Tube Sockets Jacks-Plugs-Connectors Tubes-Valves
Lamps-Diodes-Channel Switching Circuit Board Building parts Handles-Amp Trim Parts Jacks-Plugs-Connectors
Capacitors Pots-Knobs Tools and Batteries Tubes-Valves
Tube Sockets Tube Sockets Tools and Batteries Misc Hardware-Grommets-Feet-Ring terminals
Tubes-Valves Pots-Knobs Fuse Holders-Cords-AC Items Tubes-Valves
Fuse Holders-Cords-AC Items Books Pots-Knobs Lamps-Diodes-Channel Switching
Guitar Strings Tube Sockets Resistors Jacks-Plugs-Connectors
Pots-Knobs Fuse Holders-Cords-AC Items Fuse Holders-Cords-AC Items Tools and Batteries
Screws-Nuts-Washers Tube Sockets Misc Hardware-Grommets-Feet-Ring terminals Switches
Transformers Foot Pedals Switches Pots-Knobs
Tube Sockets Switches Resistors Handles-Amp Trim Parts
Transformers Pots-Knobs Bike Light Parts Circuit Board Building parts
Lamps-Diodes-Channel Switching
You can scroll through the images above using the Image scroll controls or you can use the Left and Right arrow keys on your keyboard.

Hello, you are a guest in the Hoffman Amplifiers forum June 19, 2013, 01:29:59 pm
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Media Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Best Cheap Tremolo Pedal??  (Read 2009 times)
0 Members and 1 Guest are viewing this topic.
Platefire
SMG
Level 4
***
Offline Offline

Posts: 3073


How many tube amps do you need? One more!


WWW
« on: December 06, 2010, 04:19:02 pm »

I'm a classic type tremolo fan and have it in my Mesa Boogie Rocket 440, Peavey Pacer/AB 763 Deluxe reverb conversion, my two Silvertone 1482's and a Dunlop Stereo Panner/Tremolo on my main pedal board. I needed a trem for my smaller pedalboard that has my basic elelments--analong delay and distortion pedal. So I've been reading reveiws and looking at specs to find the cheapest, best features and best sounding tremolo pedal for under $50.00. My research has led me to the Daneletro CT-1 Cool Cat Tremolo. The Dano Tuna Melt gets pretty good reviews for sound but is very delicate plastic case and knobs. The cool cat has metal case and true bypass. I did look on e-bay but couldn't see buying used when for couple of bucks more could get new. I went ahead and ordered the Cool Cat from MF for $39.00 with free shipping. Anybody got any input for a good classic type trem pedal in this price catagory--???
 
http://www.coolcattone.com/product_trem.html

BTW-I found ARTEC SE-VTM Vintage Tremolo that I liked the appearance(boutique like), has a steel case and true bypass but the overall reviews indicates its sound and performance was not very good.   

http://www.artecsound.com/effect/index.html
« Last Edit: December 06, 2010, 06:51:56 pm by Platefire » Logged

On the right track now<><
Platefire
SMG
Level 4
***
Offline Offline

Posts: 3073


How many tube amps do you need? One more!


WWW
« Reply #1 on: December 10, 2010, 12:19:47 am »

Well it seems nobody is interested in talking cheap tremolo pedals  cry  Anyway I got mine in this afternood and tried it out with all my tremolo songs and it passed the test with flying colors. If you looking for a tremolo to provide a vintage type tremolo especially like classic fender amps and really like most classic amps with tremolo--this is the read deal. I have one basic setting I set all my tremolos (mild depth and fast speed) to on my amps/pedals and it only took me a second to find it on the soft setting.
Logged

On the right track now<><
12bz7
Level 2
**
Offline Offline

Posts: 220


I love tube amps


« Reply #2 on: December 10, 2010, 10:57:09 am »

It's not that nobody's interested it's just that there's not much around in that price range. I use the tuna melt with a loop pedal so I don't have to mess with the fragile switch. That means it takes up twice the  room on a small board, should have got the cool cat instead, oh well.
Logged
Platefire
SMG
Level 4
***
Offline Offline

Posts: 3073


How many tube amps do you need? One more!


WWW
« Reply #3 on: December 10, 2010, 02:19:00 pm »

According to all the reviews the Tuna Melt has the sound. It's just everything on the exterior is fragile. I found a site that tells how to mod/reinstall it in another chassis. On the Cool Cat I found a site on how to install a level pot in the existing housing. I see no need in that for my purposes--the level pretty much matches the original signal as far as I can tell--that all I need. The only thing negative I can say about the cool cat is it seems to have a little treble boost when it's engaged.
Logged

On the right track now<><
Boots Deville
SMG
Level 2
***
Offline Offline

Posts: 360



« Reply #4 on: December 10, 2010, 04:01:32 pm »

I've got a Boss Tremolo pedal that has been modded by Keeley that I like.  The nice thing about the mods is that one of the pots was replaced with a dual-concentric pot, one of which reduces the effect of the tremolo as it's rotated clockwise.  The result is, when turned fully clockwise it functions as a nice clean boost.  Since "For What It's Worth" is the only song currently in the set list that uses Tremolo, I use it way more as a clean boost than I do for the trem.  In that respect is saves room on the pedalboard.
Logged
Cups
Level 2
**
Offline Offline

Posts: 105


« Reply #5 on: December 10, 2010, 06:19:08 pm »

I think the major reasons people were not responding is because we were in agreeance with you. There are not that many choices for Trem under 50$.
Logged
Platefire
SMG
Level 4
***
Offline Offline

Posts: 3073


How many tube amps do you need? One more!


WWW
« Reply #6 on: December 10, 2010, 11:59:08 pm »

Well I'm glad you guys finally showed up!  Thanks! grin Yeah I was really wondering if I could get a really worthy tremolo for cheap. Thats why I did a lot of review reading before I pulled the trigger and I think it paid off and so far really happy with it. Prior to this I've always looked down on the Dano pedals as cheap undesirable stuff. I really don't care for the pedal's looks, but the sound/operation is there and it don't degrade my original signal. I just never would have guessed dano but 90% of all reviews are good and I think I could write a good review on it myself. Only time will prove the reliablility but the sound and operation is great for my purposes.  

There was a Boss Trem on e-bay for $58.00 that was tempting. I kept reading that the older Bosses had a problem with volume drop when engaged?? I did read about the Keeley mod was suppose to correct that and also about the boost. I don't think the newer bosses have that problem. Boss make a great reliable pedal----been at it for years. I've never had a problem with a Boss pedal. The Boss was just a little more than I wanted to spend on myself here a Christmas  rolleyes
« Last Edit: December 11, 2010, 12:06:36 am by Platefire » Logged

On the right track now<><
Platefire
SMG
Level 4
***
Offline Offline

Posts: 3073


How many tube amps do you need? One more!


WWW
« Reply #7 on: December 31, 2010, 01:28:34 am »

I was playing around with this trem tonight and tried it with the depth and speed turned all the way down. It adds a nice little sparkel or something to the sound plus seems to add a slight compression. I will have to try that when I'm playing live with my group and see how it goes and cuts through. Platefire
Logged

On the right track now<><
Cups
Level 2
**
Offline Offline

Posts: 105


« Reply #8 on: January 01, 2011, 01:48:01 pm »

If the Dan is based on the EA trem then the EA has a nice sounding preamp driving the trem. There are mods to bypass the trem and use the pedal as a boost.

Are there schems of that Dan trem?
Logged
Pages: [1]   Go Up
  Print  

 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!
This is the Hoffman amplifiers tube amp parts catalog, please choose a link below.
Amp trim/Handles Bike Lighting parts Board Building Parts Guitar Strings/Books
Capacitors Chassis/Boxes Foot Pedals Fuses/Cords/AC
Jacks/Plugs/connectors Pots/Knobs Lamps/Diodes/Channel Switching Misc. Hardware
Resistors Reverb Items Screws/Nuts/Washers Switches
Tools-Batteries Transformers Tubes/Valves Tube Sockets
Wire/Cable Public Parts list Page Search the Hoffman Amps parts catalog Non Stocked Parts
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photos, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Check out our huge library of schematics here

click here for more info